Crossfire

ATTENTION:
Due to the ultra thin wall structure of this superlight steel product please use a 150 grit belt and light pressure when abrading tip for assembly. The same care should be taken as with a graphite shaft.


Tip trimming instructions for Crossfire woods
(butt trim to finished length)

	Head Style	3 Wood	4 Wood	5 - 7 Wood
	Through bore	0.0"	0.5"	1.0"
	Blind bore	0.25"	0.75"	1.25"
	Standard bore	0.75"	1.25"	1.75"

Tip trimming instructions for Crossfire parallel irons
(butt trim to finished length)

	Head Style	16" Hybrid	18" Hybrid	21" Hybrid	24" Hybrid
	All flexes	0.0"	0.5"	1.0"	1.5"

<< Crossfire Product Page