GS 75

ATTENTION:
Due to the ultra thin wall structure of this superlight steel product please use a 150 grit belt and light pressure when abrading tip for assembly. The same care should be taken as with a graphite shaft.


Trimming instructions for GS 75 parallel irons
(butt trim to finished length)

	Iron	Trim
	3-iron	0"
	4-iron	0.5"
	5-iron	1.0"
	6-iron	1.5"
	7-iron	2.0"
	8-iron	2.5"
	9-iron	3.0"
	PW	3.25"

<< GS 75 Product Page