TX-90

ATTENTION:
Due to the ultra thin wall structure of this superlight steel product please use a 150 grit belt and light pressure when abrading tip for assembly. The same care should be taken as with a graphite shaft.

Trimming instructions for TX-90 parallel woods
(butt trim to finished length)

	Head Style	Driver	3 Wood	4 Wood	5 - 7 Wood
	Through bore	0.0"	0.5"	0.75"	1.0"
	Blind bore	0.5"	1.0"	1.25"	1.5"
	Standard bore	1.25"	1.75"	2.0"	2.25"

Trimming instructions for TX-90 parallel irons
(butt trim to finished length)

	Iron	Trim
	1-iron	0.0"
	2-iron	0.5"
	3-iron	1.0"
	4-iron	1.5"
	5-iron	2.0"
	6-iron	2.5"
	7-iron	3.0"
	8-iron	3.5"
	9-iron	4.0"
	PW	4.25"

<< TX 90 Product Page