|
|
|
|
 |
|
|
|
This information can be used to identify an unmarked shaft.
Use a ruler or other measuring instrument to match the shaft to a product
description in the following table.
All shafts listed below have parallel tips.
|
|
Product |
Tip to 1st Step (Inches) |
Step Pattern (From Tip in Inches) |
Overall Length |
|
|
Dynamic Gold R300 |
12.125 |
9 @ 1.875, 2 @ 3.0 |
41 |
|
Dynamic Gold S300 |
10.125 |
9 @ 1.875, 2 @ 3.0 |
41 |
|
Dynamic Gold X100 |
10.125 |
8 @ 1.875, 2 @ 3.0 |
41 |
Dynamic Gold
w/Sensicore R300 |
11.625 |
9 @ 1.875, 1 @ 3.0, 1 @ 2.5, 1 @ .5 |
41 |
Dynamic Gold
w/Sensicore S300 |
9.625 |
9 @ 1.875, 1 @ 3.0, 1 @ 2.5, 1 @ .5 |
41 |
Dynamic Gold
w/Sensicore X100 |
9.625 |
8 @ 1.875, 1 @ 3.0, 1 @ 2.5, 1 @ .5 |
41 |
|
Dynamic Gold Lite R300 |
13.75 |
2 @ 1.5, 6 @ .875, 10 @ 1.0, 1 @ 1.5 |
41 |
|
Dynamic Gold Lite S300 |
11.75 |
2 @ 1.5, 6 @ .875, 10 @ 1.0, 1 @ 1.5 |
41 |
|
Dynamic Gold Lite X100 |
9.75 |
2 @ 1.5, 6 @ .875, 10 @ 1.0, 1 @ 1.5 |
41 |
|
Dynalite Gold R300 |
13.5 |
12 @ 1.25, 2 @ 2.0 |
40 |
|
Dynalite Gold S300 |
11.5 |
12 @ 1.25, 2 @ 2.0 |
40 |
|
Dynalite Gold X100 |
9.0 |
12 @ 1.25, 2 @ 2.0 |
40 |
|
Custom Lite A/L |
15.0 |
4 @ .5, 1 @ 3.0, 4 @ .5, 1 @ 3.0, 3 @ .5, 2 @ 2.0, 1 @ 1.0 |
43 |
|
Custom Lite R/S |
12.5 |
4 @ .5, 1 @ 3.5, 4 @ .5, 1 @ 3.5, 3 @ .5, 1 @ 3.0, 1 @ 2.0, 1
@ 1.0 |
43 |
|
TX-90 A |
12.0 |
4 @ .75, 9 @ 1, 2 @ 1.5 |
41 |
|
TX-90 R |
11.0 |
4 @ .75, 9 @ 1, 2 @ 1.5 |
41 |
|
TX-90 S |
10.0 |
4 @ .75, 9 @ 1, 2 @ 1.5 |
41 |
|
Release L |
16.0 |
2 @ .5, 3 @ .75, 2 @ 1.0, 1 @ 1.75, 1 @ 2.5, 4 @ 1.0, 1 @
2.0, 1 @ 2.5 |
39 |
|
Release M |
14.75 |
2 @ .5, 3 @ .75, 2 @ 1.0, 1 @ 1.75, 1 @ 2.5, 5 @ 1.0, 1 @
2.0, 1 @ 2.5 |
43 |
|
TT Lite XL A/L |
10.0 |
11 @ 1.5, 1 @ 3.0, 3 @ 1.0 |
40 |
|
TT Lite XL R/S |
12.0 |
11 @ 1.5, 1 @ 2.0, 1 @ 3.0 |
43 |
|
Dynamic R/S |
12.125 |
9 @ 1.875, 2 @ 3.0 |
41 |
|
Dynalite A/L |
13.75 |
11 @ 1.25, 2 @ 2.5 |
41 |
|
Dynalite R/S |
12.5 |
12 @ 1.25, 2 @ 2.0 |
42 |
|
|
|
|
|
|
|
