|
The purpose of this guide is to provide detailed product information and trimming instructions for True Temper
shafts. Please remember the following general rules when assembling your clubs: |
 | Butt trim shafts to finished length after tip trimming unless
specified. |
| Taper tip shafts should never be tip trimmed because they are
designed to discrete lengths. Butt trim taper tip shafts to finished
length |
| Tip trim according to head type (refer to the appropriate chart
below). |
| The finished club lengths listed are for reference only and should
not be considered "standard" lengths. |
|
Assembled club lengths
|
|
Irons |
|
|
|
1-iron |
2-iron |
3-iron |
4-iron |
5-iron |
6-iron |
7-iron |
8-iron |
9-iron |
PW |
|
|
Steel
|
39.75" |
39.25" |
38.75" |
38.25" |
37.75" |
37.25" |
36.75" |
36.25" |
35.75" |
35.5" |
|
Graphite |
40.0" |
39.5" |
39.0" |
38.5" |
38.0" |
37.5" |
37.0" |
36.5" |
36.0" |
35.75" |
|
|
Woods |
|
|
|
|
Driver |
3-wood |
4-wood |
5-wood |
7-9 wood |
|
|
|
Steel |
44.0" |
43.0" |
42.5" |
42.0" |
41.0" |
|
Graphite/BiMatrx |
45.0" |
44.0" |
43.5" |
43.0" |
42.0" |
|
|
|
Clubhead styles |
|
|
|
|
Through-bore
|
With a through-bore head the shaft
is inserted through the entire clubhead. |
|
|
Blind-bore
|
A blind-bore head usually has a shaft
insertion depth of 1 ¼” to 2”. |
|
|
Standard-bore
|
A standard-bore head usually has a
shaft insertion depth of 1” to 1 ¼”. |
|
|
|
|
